Finish Fins First V2

Finish Fins First V2 Windsurfing Fin

This fin will lift the nose high enough to fly over the gnarliest of chop, keeping the trim of your board at all times and giving you the base you need to reach that important first mark first. A good slalom fin needs to perform in a wide range of conditions, which was the major design focus for this model. Downwind, upwind, change of direction; it can handle it all.

New materials have been used to build this fin, resulting in an even higher quality fin than our previous models. Increased UD carbon fiber volume fraction, TeXtreme spread tow and new finishing techniques are used to take that next step forward. Resin transfer molding (RTM) is a closed molding process for the production of composites. In RTM, resin is injected under pressure into a preform filled mold cavity. A low void laminate has a higher load carrying capacity. The RTM process produces parts with very low void content which makes it ideal for application in the construction of highly loaded composite parts like windsurfing fins.