Patrik Foil A.I.O. (All In One)
Those innovative all-in-one boards are built to last! The full-carbon sandwich PVC construction makes those boards really stiff and consecutively very high performance. On the A.I.O. you feel connected to your foil like you have never felt before. We decided to give you really all the options with our A.I.O. range that is why all the boards have both fin box options the Foil deep turtle and also the US plate system. These are the most high-tech windfoil- and wingfoil-hybrids you can find on the market. If you want nothing less than the best ... here's the A.I.O. WS! SHAPE Rail:
A flat-beveled nose entry to reduce drag and avoid the water sucking up the rail. The round boxy rail throughout the middle of the board gives the most volume close to the bottom and makes the shape stable to kneel on it. Cutouts:
For easier and quick take-off the trick is to find the right reduction of tail volume to sink and position the front wing with a better angle of attack. The sharp edges around the tail are essential to have clean water flow release and reduce the drag when increasing/maintaining speed gliding on top of the water for take-off and touch down. Bottom Shape:
After testing, we choose less concave depth to avoid the board dragging through the water too much. We, therefore, compromised a bit softer touch-down against quicker take-off, more acceleration and speed, and less drag with more release after touch down. EVA (Deck Pad):
A full deck EVA with an indicated bump to quickly see and feel the center of the board. Finbox:
No matter if you choose to shred waves, pull freestyle moves, compete in races or simply cruise along we offer on all our sizes the Deep-Tuttle Foilbox and the 10” US-Tracks. Inserts:
With so many different foil setup options the feet position is crucial and with 68 possible holes at the front foot and 22 holes at the back foot we offer any strap position needed. Leash Plug & Fin-Handle:
Secure your board with a wrist- or leg-leash attached to the leash plug at the tail. For strength & performance reasons we offer a Grab-Handle-Fin to carry the board which is fixed with the “FCS-System” on the bottom of the board. CONSTRUCTION
The stiffer a foilboard can be the more control and performance you have as a rider - It's as simple as that!! As the only brand worldwide being able to produce “One-Shot-Monocoque” hollow windsurf boards (AIRINSIDE) we implemented our knowledge also to our EPS boards. With a full Deck-Rail-Bottom PVC Sandwich with full Deck-Rail-Bottom Carbon wrap and the exclusive Pre-Preg Carbon/Honeycomb Mast-track & Deep Tuttle Foil Box (depending on the model) and the exclusive Monocoque reinforcements, we are easily leading today’s construction methods for this sport.
Patrik knows there are boards being sold at very low prices all around the market, but the concern is how long will they last. After the full wing season in Australia it became apparent that softer constructions cannot handle the stress of the more extreme riding, puming and hard landings. Whoever has a better understanding of composite technology and a decent knowledge of foil boarding knows that a board construction without PVC is not gonna last long for any rider – not even for the beginner. It is a fact that any construction without a PVC sandwich shell wrapped all around the board is simply done by many brands to save money. The feedback from repair shops around the world is also straightforward – “Any construction without PVC sandwich will not last more than a few months – no matter how many carbon layers you put!”
1) Stiffness & lightweight are the key words to learn fast and to perform at best in competition.
2) Static load is the killer of any foil board.
3) Impact is a standard for any learner and pro who wants to get better. This is why we are convinced to offer you the best boards with the best construction technology currently available.
Try one and feel the difference!!